The Forney Easy Weld line of machines are designed specifically to take the fear out of welding. For the do-it-yourselfer, auto enthusiast, metalworking artist and hobbyist, there’s not a doubt that these machines will be the perfect tool.
Check out the information below to see which Forney Easy Weld machine is right for you!
MACHINES
APPLICATION
What Do You Need The Machine For?
DIY | Maintenance | Repair | Hobbies | Metal Fabrication | Metal Art |
X | X | X | X |
DIY | Maintenance | Repair | Hobbies | Metal Fabrication | Metal Art |
X | X | X | X | X |
DIY | Maintenance | Repair | Hobbies | Metal Fabrication | Metal Art |
X | X | X | X | X |
DIY | Maintenance | Repair | Hobbies | Metal Fabrication | Metal Art |
X | X | X | X | X | X |
DIY | Maintenance | Repair | Hobbies | Metal Fabrication | Metal Art |
X | X | X | X | X | X |
PROCESSES
What Process Capabilities Are Needed?
FEATURES AND BENEFITS
What Can The Machine Do?
The Forney Easy Weld 140 Multi-Process machine is a 3-in-1 machine (Stick/MIG/TIG). Lightweight and extremely easy to use, it is a single-phase inverter machine.
- Easy to use
- Portable
- Lift arc TIG capable
- 1-year warranty
- Infinite voltage
- Infinite wire-feed speed control
- No gas required
The Forney Easy Weld 140 FC-i is a powerful flux-core wire welder. This unit is easy to use and features infinite voltage and wire-feed speed control. It does not require gas and can run off standard household power with a 20 AMP breaker.
- Easy to use
- Portable
- Lift arc TIG capable
- 1-year warranty
- Gasless/flux-core welding only
- Torch wrap
- Infinite voltage
- Infinite wire-feed speed control
The Forney Easy Weld 100 ST is Forney Industries‘ lightest welder, weighing in at about 10 lbs. This machine is easy to use and has an incredibly small footprint. Ideal for those just learning to weld. Shielding gas is not required to operate this machine.
- Easy to use
- Portable
- Lift arc TIG capable
- 1-year warranty
- No shielding gas required
The Forney Easy Weld 180 ST stick machine is dual-voltage, lightweight, easy to use and generator friendly. Perfect for beginner welders. Includes 8′ electrode holder and cable, 8′ ground clamp and cable, 230 to 120 volt adaptor and 6′ power cord.
- Easy to use
- Portable
- Lift start TIG only (no foot pedal operation)
- 1-year warranty
- Not recommended for aluminum welding
The Forney Easy Weld 20 P is a powerful and easy to use plasma cutter. This plasma cutter weighs 21.5 lbs, is generator friendly and runs off a standard 120V outlet, making cutting on the go easy and efficient.
- Easy to use
- High duty-cycle and cutting capacity
- Portable
- 1-year warranty
- Air compressor required
SPECIFICATIONS
What Machine Specifications Fit Your Needs?
MACHINE | INPUT | OUTPUT | ELECTRODE DIAMETER | WIRE DIAMETER | PLATE THICKNESS RANGE | WEIGHT | UNIT DIMENSIONS |
Forney Easy Weld 100 ST | 120V | 90 A | Up to 1/8″ | X | Up to 3/16″ | 9.65 lbs. | 12″ x 5.5″ x 10.5″ |
Forney Easy Weld 140 MP | 120V | 140 A | Up to 1/8″ | 030”/.035” | Up to 1/4″ | 24.81 lbs. | 14.19″ x 19.31″ x 11.61″ |
Forney Easy Weld 140 FC-i | 120V | 140 A | X | 030”/.035” | Up to 1/4″ | 19 lbs. | 16.75″ x 8.125″ x 12″ |
Forney Easy Weld 180 ST | 120V/230V | 90 A/180 A | Up to 1/2″ | X | Up to 1/2” of mild steel | 14 lbs. | 11″ x 6-5/16″ x 14-1/8″ |
Forney Easy Weld 20 P | 120V | 20 A | X | X | Cuts up to 1/4” of mild steel | 21.5 lbs. | 15.125″ x 8.125″ x 11.57″ |
RECOMMENDED CONSUMABLES AND ACCESSORIES
What Are The Best Products To Use With Each Machine?
ACCESSORIES
5 lb. 1/8″ Electrode
ITEM# 31205/E6011
ITEM# 30405/E6013
ITEM# 32105/E7014
ITEM# 30805/E7018
ER70S-6 Steel Wire
ITEM# 42285- .024″
ITEM# 42286- .030″
ER70S-6 Steel Wire
ITEM# 42290- .024″
ITEM# 42291- .030″
E71T-GS Flux Wire
ITEM# 42300- .030″
ITEM# 42302- .035″
MIG Pliers
ITEM# 85801
Regulator
ITEM# 85363
Gas Hose
ITEM# 85663
TIG Torch
ITEM# 85657
Nozzle Gel
ITEM# 37031
Anti-Spatter Spray
ITEM# 37030
Chipping Hammer
ITEM# 70600
Welding Cart
ITEM# 332
Bandit Welding Helmet
ITEM# 55666
Forney Easy Weld ADF Helmet
ITEM# 55731
Signature Welding Gloves
ITEM# 53410-11
CONSUMABLES |
||||
ELECTRODE | WEIGHT | 1/16″ ITEM# | 3/32″ ITEM# | 1/8″ ITEM# |
E6011 | 1 lb. | – | 31101 | 31201 |
E6013 | 1 lb. | 40201 | 30301 | 30401 |
E7014 | 1 lb. | – | 32001 | 32101 |
E7018 | 1 lb. | – | 30701 | 30801 |
E6011 | 5 lbs. | – | 31105 | 31205 |
E6013 | 5 lbs. | – | 30305 | 30405 |
E7014 | 5 lbs. | – | 32005 | 32105 |
E7018 | 5 lbs. | – | 30705 | 30805 |
TIG ROD | ||||
EROS-6 | 5 lbs. | 42330 | – | – |
CONSUMABLES |
||||
ELECTRODE | WEIGHT | 1/16″ ITEM# | 3/32″ ITEM# | 1/8″ ITEM# |
E6011 | 1 lbs. | – | 31101 | 31201 |
E6013 | 1 lbs. | 40201 | 30301 | 30401 |
E7014 | 1 lbs. | – | 32001 | 32101 |
E7018 | 1 lbs. | – | 30701 | 30801 |
E6011 | 5 lbs. | – | 31105 | 31205 |
E6013 | 5 lbs. | – | 30305 | 30405 |
E7014 | 5 lbs. | – | 32005 | 32105 |
E7018 | 5 lbs. | – | 30705 | 30805 |
TIG ROD | ||||
ER70S-6 | 5 lbs. | 42330 | – | – |
ACCESSORIES
Argon/CO2 Flowmeter
ITEM# 85364
Signature Welding Gloves
ITEM# 53410-11
Bandit Welding Helmet
ITEM# 55666
Forney Easy Weld ADF Helmet
ITEM# 55731
ACCESSORIES
Portable Welding Cart
ITEM# 37031
E71T-GS Flux-Cored Wire
ITEM# 42301
E71T-GS Flux-Core Wire
ITEM# 42300
Nozzle Gel, 16 oz.
ITEM# 37031
Anti-Spatter Spray, 16 oz.
ITEM# 37030
Chipping Hammer
ITEM# 70600
MIG Pliers
ITEM# 85801
Bandit Welding Helmet
ITEM# 55666
Forney Easy Weld ADF Helmet
ITEM# 55731
ACCESSORIES
ELECTRODE CHART |
|||
DIAMETER | AMPS | ||
Inch | Milimeter | Amps | |
E6010 & 6011 | 3/32 | 2.4 | 30-75 |
1/8 | 3.2 | 35-120 | |
5/32 | 4.0 | 80-160 | |
E6013 | 1/16 | 1.6 | 20-50 |
3/32 | 2.4 | 40-90 | |
1/8 | 3.2 | 50-130 | |
5/32 | 4.0 | 90-180 | |
E7014 | 3/32 | 2.4 | 50-100 |
1/8 | 3.2 | 60-130 | |
5/32 | 4.0 | 90-180 | |
E7018 | 3/32 | 2.4 | 50-100 |
1/8 | 3.2 | 80-160 | |
5/32 | 4.0 | 90-180 |
POLARITY CHART |
||
Electrode | DC | Penetration |
E6010 | EP | Deep |
E6011 | EP | Deep |
E6013 | EP-EN | Shallow |
E7014 | EP-EN | Medium |
E7018 | EP-EN | Medium |
NICKEL | EP | Shallow |
STAINLESS STEEL | EP | Shallow |
EP = Electrode Positive | EN = Electrode Negative |
Looking at replacing my old Lincoln 225 stick welder with your easy weld 180 ST 120/230. Can this machine handle longer welding leads? (30-40ft) If so, can I make use of the leads on my Lincoln or use some older Miller (plug & twist) welder leads? Thanks
Hi Mike! This is a question for our Expert-Tech Department. They will be better suited to answer you question! You can reach them at 1-800-521-6038 ext. 2, or email technicalservice@forneyind.com.