by askforneyadmin | Mar 4, 2019
The Easy-Flo Brazing rod (Forney ITEM# 46111) is a self-fluxing rod. The “as brazed” tensile strength is 35,000 PSI. This product is applied via oxy-fuel/brazing. As for using Bare Aluminum rod, the tensile strength is lower at 29,000 psi. This product...
by askforneyadmin | Mar 1, 2019
Yes, see our line of oxy-acetylene products here or our soldering products here.
by askforneyadmin | Mar 1, 2019
You may use propane with the other components in the set. The only difference is that propane will dry out the O-rings on the torch and handle, the diaphragm on the regulator, as well as the hose quicker than acetylene will.
by askforneyadmin | Mar 1, 2019
Lead is shown on the Safety Data Sheet (SDS) as 80 – 100%, Tin is between 1 and 5%, and Metal between 1 and 5%. You can also see the SDS on the product page...
by askforneyadmin | Mar 1, 2019
It’s essentially the same standard, except the UN/ISO standard is globally recognized (including by the USDOT) instead of just being recognized in the US/Canada. The bottom row of the stamping on our cylinders contains the UN/ISO standard stamp. There should be...
