by askforneyadmin | Mar 4, 2019
No, stainless steel requires gas to weld. The 125 FC (Flux-Core) does not use gas. We recommend Forney MIG machines for welding stainless steel.
by askforneyadmin | Mar 4, 2019
This machine should be fine to run on a surge protected outlet. You will want to make sure the rating for current on the surge protection outlet is at least 25 amps for this machine or it could damage the surge protector (depending on the type of surge...
by askforneyadmin | Mar 4, 2019
This welder requires a minimum 3500-watt generator to operate properly.
by askforneyadmin | Mar 4, 2019
80 Amps at 20%.
by askforneyadmin | Mar 4, 2019
Here are a couple of common issues: Check the tension on the despooler. Is it set too tight or is the wire feed tension not set correctly? Are you using .035” wire? We recommend .030″. Is your stickout too long? Your stickout should be no more than ½”. Make sure...
